Construction adhesive KKK
The construction adhesive KKK 310 is a D4 adhesive according to DIN EN 204, tested by ift-Rosenheim, test report no. 505 24562/1, heat-resistant according to WATT 91.
Processing:
The substrates to be bonded must be free of dust, grease and oil, as well as solid and stable. If necessary, sand down beforehand. Apply construction adhesive KKK 310 from the cartridge in a bead-like manner, distribute with a notched trowel when bonding surfaces. One-sided adhesive application. In the case of non-absorbent substrates, it is recommended to apply adhesive on both sides. Put the parts together and, if necessary, fix them until they are ready for assembly or hardening. When bonding wood, the residual moisture in the wood should be approx. 8 - 10%. The construction adhesive KKK 310 hardens by means of moisture with gap-filling bonds approx. 2 - 3 mm per day. The hardening process is accelerated by adding water mist and higher temperatures.
Areas of application:
Structural bonding of wood-based materials, combination bonding with metals, plastics, concrete, brick, stone, marble and natural stone, styrofoam, rigid foam, plasterboard, decorative panels, insulating materials, sandwich panels, wall cladding. Gluing in wooden window construction, aluminum window corner brackets, window sills, house door panels, stairs and installation panels.
Properties:
Assembly and repair bonding of almost all materials - Solvent-free - Waterproof, resistant to aging, weathering and temperature - Very high initial adhesion - Fast curing - Easy processing - Can be sanded and painted over - Use of conventional dispensing guns - For indoor and outdoor use
Prospekt
KKK_DE.pdf (139.62KB)